Aegis Micro NRC 2.0.1 User Manual download pdf (Page 31)

Users’ Guide: Networked Receiver Controller - NRC-2.0.1 PAGE 31

Change Receiver Model Dialog

The model of the receiver attached to a channel may be changed from the channel node in the

tree if the client is currently connected to that channel. Right-click on the channel node, select

“Change receiver model” and the “Change receiver model” dialog appears.

The current receiver is displayed, and a dropdown box contains a list of receiver models

supported by the NRC server. Select the new model from the list or select “None” to indicate

that no receiver is attached to this channel. Press Enter or click the Enter button and the dialog

will be dismissed. Confirm the change by noting the contents of the tree.

The change in receiver model is persistent and will be remembered even after the NRC server is

powered off.

Note: Ensure the correct receiver audio and control cables are connected to the NRC in line with

these new options. Power-down the NRC while cable changes are made.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 41 42

No comments

Aegis Micro NRC 2.0.1 User Manual Page 31